Field Strength Logging and Surveillance mobile System

  • CALL 1.888.779.8766

  • Availability: In Stock
  • Sku: SPT-WIN-PFSL-G3

Until recently, the task of mobile field strength logging, monitoring and surveillance typically required several pieces of conventional equipment interconnected into bulky and expensive systems. The PFSL-G3 system provides an...

Tags:

Until recently, the task of mobile field strength logging, monitoring and surveillance typically required several pieces of conventional equipment interconnected into bulky and expensive systems.

The PFSL-G3 system provides an elegant, fully integrated solution, specifically designed for mobile "drive-by" signal coverage measurements, field strength mapping, mobile surveillance and other similar investigative operations. The system even employs an integrated GPS receiver to display and store geographical co-ordinates of the measured signal. The logged data include time, date, latitude, longitude and altitude.

Includes:

  • This system is enclosed in a ruggedized easily transported enclosure, which contains the control computer, the receiver and rechargeable battery. It can be powered from three sources: Internal rechargeable batteries, a vehicle's 12V DC power outlet or mains power. Leads to connect to mains and the vehicle power outlet are included. The enclosure features dual fans for cooling and built-in fuses protect system components. The GPS, receiver antenna and power connectors are easily accessible.
  • The PFSL-G3 system is based on G-315e receiver and on AMFE Antenna Multiplexer and Frequency Extender, making it possible to achieve the necessary high level of integration.

Dimensions : 460mm x 330mm x 165mm

Bandwidth : 50 - 15000 Hz

Frequency : Gamme entrée: SHF: 1796 MHz à 8599 MHz

Frequency Stability : 0.5 ppm (0 to 60° C)

Gain : HF: 0 to 3 dB, VHF: 5 to 7 dB, UHF: 1 to 5 dB, SHF: -3 to 12 dB

Image Rejection : 1.8-150 MHz: 60 dB typ., 150-1800 MHz: 50 dB typ.

Input : 50 ohm (Connecteur SMA)

Interface : 5 x SMA, USB (1.0 and 2.0 compatible)

Intermediate frequencies : IF1: 109.65 MHz, IF2: 16 kHz

Internal spurious : Typiquement moins qu'une entrée d'antenne équivalent de -105 DBm

LO leakage to IF : Mieux que -56 dBm

Max. input : +18 DBm

MDS : +18 DBm

LO leakage to IF : Mieux que -40 dBc

Mode : AM, AMS, LSB, USB, DSB, ISB, CW

NF : HF: 2,5 dB, VHF: 6 dB, UHF: 3,5 dB, SHF: 8 dB

Output : signal numérisé SI et audio via l'interface USB

Phase noise : -148 dBc/Hz @ 100 kHz

Receiver type : Basé DDS superheterodyne à conversion double avec logiciel défini dernière étape IF et démodulateur

Roofing filter : 2 x 4-pole 20 kHz filtre cristal

RSSI accuracy : 2 dB

RSSI sensitivity : -137 DBm

Tuning resolution : 1 Hz

Timer Spurious-free dynamic range : 90 dB

Isolation Input/Output : HF, VHF: 40 dB min., UHF, SHF: 30 dB min.

EN
EN